Welcome to Changzhou Jewell Gas Spring Co.,Ltd. !

YOU CAN CONTACT US HERE.

86-519-86265768

Fax: 86-519-86265758
Email:
juwei@cnjuwei.cn
Website: www.cnjuwei.cn
Address: NO.8,Zhaiqiao Industrial Area,Wujn,Changzhou,Jiangsu,China(213177)

 

YOU CAN CHECK WHAT YOU NEED

Search

Copyright © Changzhou Jewell Gas Spring Co.,Ltd. 苏ICP备12012819号    Powered by : www.300.cn

 

三博

Things to be aware of when installing a gas spring

Classification:
Company News
2019/03/26 13:57
1. The gas spring is installed from bottom to top to reduce the friction of the inner wall surface, ensure a good damping coefficient and maintain the best buffering capacity.
2. The support rod installation position moves over the center line of the structure to avoid automatically opening the door.
3. Prevent the gas inside the spring from overflowing.  The sealing is extremely important. Therefore, the surface of the piston rod must not be damaged. It is strictly forbidden to apply paint and chemicals to the piston rod.
4. The gas spring should not be subjected to the action of tilting force or lateral force during work. Do not use as handrails. Inferior gas springs may explode when the temperature of the automobile gas spring is too high.
5, gas spring internal high pressure, is a high-pressure industrial products, the temperature should not be too high, and must not collide.
6, the ambient temperature of 34°C ~ 71°C, some specific manufacturing gas springs can be used in 80 ° C environment, too high temperature may cause damage or explosion.
7, the size should be reasonable,  the size of the force should be appropriate, the piston rod stroke size should have a margin of 8mm.